Overview
PMe50-40 Poclain Hydraulic pumps
PMe50-40 axial piston pump with embedded electronic
The PMe50-40 is a hydraulic pump with embedded electronic for mobile machine, 40 cm³ /rev. max., axial piston technology, variable displacement, compact design, a large choice of electro proportional controls, embedded electronics, plug & drive solution. Closed loops hydraulic pumps design for performance and easy integration on mobile machine.
Reduce your development costs and time - The PMe is designed to be easily integrated into a wide variety of machines. The PMe's on-board ECU can withstand the harshest environments, including proximity to the combustion engine. The ECU is pre-wired a hydraulic pump withd pre-programmed; after shipping, the system is ready to be connected to the driving devices (e.g. the travel pedal, joystick, brake pedal) and is ready to use.
The associated electronic devices are delivered already plugged onto the pump and wired to the ECU. The factory-installed harnesses are tested at the end of the assembly line prior to delivery. The two integrated CAN Buses allow configurating, machine diagnosing and information sharing with other machine components (e.g. engine, displays, hydraulic components).
Among the many pre-defined software functionalities included in the PMe packages, the speed control loop is available for specific applications that need constant driving speed, a pre-requisite being two speed sensors in the wheels. The PMe pump can also be used as a slave unit via CAN Bus. The CAN message redundancy allows for safe control of the pump. It ensures an accurate control thanks to an internal pump calibration. The PMe can also provide the plugged sensors' physical and electrical values (temperature, pressure, speed) via CAN Bus to the master ECU.
Reduce your development costs and time - The PMe is designed to be easily integrated into a wide variety of machines. The PMe's on-board ECU can withstand the harshest environments, including proximity to the combustion engine. The ECU is pre-wired a hydraulic pump withd pre-programmed; after shipping, the system is ready to be connected to the driving devices (e.g. the travel pedal, joystick, brake pedal) and is ready to use.
The associated electronic devices are delivered already plugged onto the pump and wired to the ECU. The factory-installed harnesses are tested at the end of the assembly line prior to delivery. The two integrated CAN Buses allow configurating, machine diagnosing and information sharing with other machine components (e.g. engine, displays, hydraulic components).
Among the many pre-defined software functionalities included in the PMe packages, the speed control loop is available for specific applications that need constant driving speed, a pre-requisite being two speed sensors in the wheels. The PMe pump can also be used as a slave unit via CAN Bus. The CAN message redundancy allows for safe control of the pump. It ensures an accurate control thanks to an internal pump calibration. The PMe can also provide the plugged sensors' physical and electrical values (temperature, pressure, speed) via CAN Bus to the master ECU.
The PMe50-40 is a hydraulic pump with embedded electronic for mobile machine, 40 cm³ /rev. max., axial piston technology, variable displacement, compact design, a large choice of electro proportional controls, embedded electronics, plug & drive solution. Closed loops hydraulic pumps design for performance and easy integration on mobile machine.
Reduce your development costs and time - The PMe is designed to be easily integrated into a wide variety of machines. The PMe's on-board ECU can withstand the harshest environments, including proximity to the combustion engine. The ECU is pre-wired a hydraulic pump withd pre-programmed; after shipping, the system is ready to be connected to the driving devices (e.g. the travel pedal, joystick, brake pedal) and is ready to use.
The associated electronic devices are delivered already plugged onto the pump and wired to the ECU. The factory-installed harnesses are tested at the end of the assembly line prior to delivery. The two integrated CAN Buses allow configurating, machine diagnosing and information sharing with other machine components (e.g. engine, displays, hydraulic components).
Among the many pre-defined software functionalities included in the PMe packages, the speed control loop is available for specific applications that need constant driving speed, a pre-requisite being two speed sensors in the wheels. The PMe pump can also be used as a slave unit via CAN Bus. The CAN message redundancy allows for safe control of the pump. It ensures an accurate control thanks to an internal pump calibration. The PMe can also provide the plugged sensors' physical and electrical values (temperature, pressure, speed) via CAN Bus to the master ECU.
Reduce your development costs and time - The PMe is designed to be easily integrated into a wide variety of machines. The PMe's on-board ECU can withstand the harshest environments, including proximity to the combustion engine. The ECU is pre-wired a hydraulic pump withd pre-programmed; after shipping, the system is ready to be connected to the driving devices (e.g. the travel pedal, joystick, brake pedal) and is ready to use.
The associated electronic devices are delivered already plugged onto the pump and wired to the ECU. The factory-installed harnesses are tested at the end of the assembly line prior to delivery. The two integrated CAN Buses allow configurating, machine diagnosing and information sharing with other machine components (e.g. engine, displays, hydraulic components).
Among the many pre-defined software functionalities included in the PMe packages, the speed control loop is available for specific applications that need constant driving speed, a pre-requisite being two speed sensors in the wheels. The PMe pump can also be used as a slave unit via CAN Bus. The CAN message redundancy allows for safe control of the pump. It ensures an accurate control thanks to an internal pump calibration. The PMe can also provide the plugged sensors' physical and electrical values (temperature, pressure, speed) via CAN Bus to the master ECU.
Technical specifications
Loop
- Closed checked
MAX. Pressure
-
Bar
400
-
PSI
5720
MAX. Displacement
-
CM3
40
-
CU.IN
2.4
Power
-
kW
86
-
HP
117
Controls
- Control Mechanical checked
- Control Hydraulic checked
- Control Electrical checked
Rotation Speed
-
Rotation MAX. RPM
3600
See more features
See less features